Selection of reducer

    The principle of combination of applicability and economy should be followed in selecting and matching the reducer, that is to say, the technical indexes of the selected reducer can not only meet the requirements of the equipment, but also save the cost. Over and under will bring cost waste. Improper selection is the main reason for the failure of the reducer, so it is very important to select the reducer correctly.

    The internal performance indexes such as structure type, bearing capacity, reduction ratio, output speed, axial force, radial force, torsional rigidity, back clearance, etc. shall be considered when selecting the reducer, and the external factors such as installation form, working condition and working environment shall also be fully considered.